Technical information

 

Airflow [m3/h] 10-30
Heat recovery* [%] up to 87
Connection voltage [V] 230/12
Power required [W] up to 20
Noise*** [dB] up to 35
Dimensions [mm] 1180 / 160 / 130
Filters PM 2.5 (F7)
PM 10 (G4)
Outdoor temperature range [°C] from -25 up to 50
Control Remote / WiFi** / ModBus**
Preheating the air** [W] 300
Sensors Temperature, Moisture, CO2**, VOC**, Radon**

* Measured by EN308
** On request
*** At 8 dB of damping in the room

Clean air

MIKrovent Home is serially fitted with the F7 in G4 filters.

The inlet air filter PM 2.5 (F7) is extremely sensitive and can remove small fine air particles measuring 2.5 μm or less. In order to successfully retain small air particles, the filter must be made of special non-washable materials.

The outlet air filter PM 10 (G4) is a washable filter, preventing the entry of hard particles measuring from 2.5 μm to 10 μm.

Breathe better air. Choose MIKrovent ventilation.

Inlet air filter PM 2.5 (F7)

Outlet air filter PM 10 (G4)

Control

You control MIKrovent Home by a user-friendly remote control which can also be used to set its weekly programmer.

Breathe better air. Choose MIKrovent ventilation.

Installation location

MIKrovent Home can be installed in a window extension or on a wall. If you would like to install it in a window extension, make sure this option is available, or pay special attention when ordering windows. When installing the ventilation unit on the wall, be careful not to damage the in-wall wiring.

You don’t own MIK windows? Not a problem. You can install the MIKrovent Home ventilation unit on windows produced by other manufacturers.

Breathe better air. Choose MIKrovent ventilation.

Mounting on a window extension

Mounting on the wall

Operation

The air in the MIKrovent Home unit flows along two separate air ducts – one duct is intended for the supply of fresh air and the other for the discharge of exhaust air. Both the inlet and the outlet air travel along parallel separate ducts and along separate chambers within the ventilation unit. Both air flows meet in the heat exchanger, where the outlet air emits energy and heat to the inlet air (it either heats or cools the air).

MIKrovent Home is serially fitted with humidity and temperature sensors. The ventilation unit can operate in 4 different modes (air supply, air discharge, automatic and manual mode) and at 5 intensity levels. To ensure optimum conditions and ensure a high level of living comfort, we recommend that you use automatic mode.

MIKrovent Home operates in the temperature range from -25°C to +50°C. The unit operates continuously at all temperature and humidity conditions.

Breathe better air. Choose MIKrovent ventilation.

Appearance

Originally, MIKrovent Home comes in white, but you can choose from a wide range of other colors from the RAL scale. The two outer grilles also come in white, but it is also possible to choose a different color from the RAL scale.

Breathe better air. Choose MIKrovent ventilation.

Maintenance

MIKrovent Home is easy to maintain. In order for the ventilation unit to operate without interruptions and supply clean air into the room, you need to make sure the filters are clean.

The inlet air filter should be replaced depending on air pollution, however, at least once a year.

The outlet air filter is washable and we recommend that you wash it several times per year.

Breathe better air. Choose MIKrovent ventilation.

Scope of delivery

When purchasing MIKrovent Home the customer receives the ventilation unit with serially fitted temperature and humidity sensors, a set of filters (outlet and inlet), a remote control, and all required installation materials, including pipes/ducts and polystyrene. Consumables (such as polyurethane foam) are not included and must be supplied by the customer.

Breathe better air. Choose MIKrovent ventilation.

Installation

The ventilation unit can be installed by MIK installers at a surcharge. Bore drilling service and preparatory construction works can also be provided by MIK at a surcharge. Since the device has two air flow ducts, the installation requires two ɸ100 mm bores.

The installation does not include the installation of cables and wiring, which must be provided for by the customer prior to installer’s arrival.

Breathe better air. Choose MIKrovent ventilation.

Do you have sleeping problems or suffer from insomnia?
Breathe better air. Choose MIKrovent ventilation.

Related products

MIKrovent Office60

MIKrovent Office60 is best suited for ventilation of large, multifunctional living premises, hotel rooms and offices up to 30 – 60 m², occupied by 3 to 4 persons at the same time.

MIKrovent Professional120

MIKrovent Professional120 is intended for ventilating larger spaces, occupied by more persons (schools, kindergartens, playrooms, dining rooms, halls, meeting rooms, waiting rooms, etc.) in size of up to 120 m².

Do you have sleeping problems or suffer from insomnia?
Breathe better air. Choose MIKrovent ventilation.